Backup Lamp Switch: Service and Repair

WM 947219 Removing and installing switch for reversing light

Technical values





Removing switch for reversing light

Removing switch for reversing light (6-speed transmission)





Overview of switch for reversing light (6-speed transmission)

1. Release connector on switch for reversing light -Arrow a- and pull it off.





Pulling plug off switch for reversing light

2. Unscrew and remove switch for reversing light.





Removing switch for reversing light

Installing switch for reversing light

Installing switch for reversing light (6-speed transmission)

1. Install switch for reversing light. => Tightening torque: 15 ftlb.





Installing switch for reversing light

2. Push connector onto switch for reversing light until it is felt to engage.





Pushing connector onto switch for reversing light

3. Check operation of switch for reversing light.