Access Cover: Service and Repair

WM 700219 Removing and installing front trim (engine compartment)

Removing front trim (engine compartment)

Removing front cover (engine compartment)





1. Remove trim panel on the right.
1.1. Open lid of washer fluid container.
1.2. Unscrew fastening screw -5- at filler neck of washer-fluid reservoir.
1.3. Turn fixing clips -2- by 90° and remove them.
1.4. Remove trim panel -6- on the right.





2. Remove trim panel on the left.
2.1. Turn fixing clips -2- by 90° and remove them.
2.2. Remove trim panel -4- on the left.





3. Remove trim panel at rear.
3.1. Turn fixing clips -2- by 90° and remove them.
3.2. Remove trim panel -3- at the rear.





4. Remove front trim panel on right and left.
4.1. Turn fixing clips -2- by 90° and remove them.
4.2. Remove front trim panel -1a, 1b-.





Installing front trim (engine compartment)

Installing front cover (engine compartment)





1. Install front trim panel on right and left.
1.1. Insert front trim panel on right and left -1a, 1b- underneath the lid seal and position in engine compartment.
1.2. Position fixing clips -2- on support in direction of the click stops and press into the supports.





2. Install rear trim panel.
2.1. Insert rear trim panel -3- underneath the lid seal and position in engine compartment.
2.2. Position fixing clip -2- on the support in the direction of the click stops and press support in.





3. Install trim panel on the left.
3.1. Insert trim panel on the left -4- underneath the lid seal and position in engine compartment.
3.2. Position the fixing clips -2- on the supports in the direction of the click stops and press into the supports.





4. Install trim panel on the right.
4.1. Insert trim panel on the right -6- underneath the lid seal and position in engine compartment.
4.2. Position the fixing clips -2- on the supports in the direction of the click stops and press into the supports.
4.3. Screw in fastening screw -5- at filler neck of washer-fluid reservoir.
4.4. Position lid of washer fluid container at filler neck and close lid.