Utility Storage Compartment: Service and Repair

WM 681737 Removing and installing cover for oddments tray light

Preliminary work

1. Remove rear cover for centre console => 681737 Removing and installing rear cover for centre console - section on "Removing".

Removing cover for oddments tray light





Removing and installing cover for oddments tray light

1. Release wire harness -Arrow A-.





Releasing wire harness

2. Open oddments tray -Arrow B-.





Opening oddments tray

3. Unclip cover.
3.1. Insert a screwdriver at the clip connections -2- and lever out the cover -Arrow C-.





Unclipping cover

4. Remove cover.
4.1. Remove cover -Arrow D- and release electric plug connection -3- ( -Arrow E- ).





Removing cover

Installing cover for oddments tray light





Removing and installing cover for oddments tray light

1. Position cover.
1.1. Connect plug connection -Arrow E- and place cover in position -Arrow D-.





Positioning cover

1.2. Insert the tabs of the cover into the cut-outs in the trim panel -Arrows F-.





Inserting tabs

2. Engage clips.
2.1. Use a pointed-nose pliers to grip the locking tab and trim panel and press the locking tab into the clip -2- ( -Arrow C- ).





Engaging clips

3. Close oddments tray -Arrow B-.





Closing oddments tray

4. Lay the wire harness -4- ( -Arrow A- ).





Laying wire harness

Subsequent work

1. Install rear cover for centre console => 681737 Removing and installing rear cover for centre console - section on "Installing".