941019 Removing and installing light in rear-view mirror

WM 941019 Removing and installing light in rear-view mirror

Preliminary work

1. Remove mirror glass. -> 667819 Removing and installing mirror glass - section on "removing" 667819 Removing and installing mirror glass
2. Remove upper mirror housing. -> 667919 Removing and installing housing for rear-view mirror - section on "removing" 667919 Removing and installing housing for rear-view mirror

Removing

Removing light in rearview mirror





Overview of light in rearview mirror

1. Push back the plug connection -Arrow A- and remove from the holder -Arrow B-.





Detaching and unplugging light from mirror frame

2. Release plug connection -Arrow C- and disconnect -Arrows D-.
3. Remove lower mirror housing.-> 667919 Removing and installing housing for rear-view mirror - section on "removing" 667919 Removing and installing housing for rear-view mirror
4. Press out light from mirror housing -Arrow-.





Press out light from mirror housing.

Removing light bulb in rearview mirror

CAUTION

Risk of short circuit.

-> Before removing the bulb in the rearview mirror, take out the ignition key and switch off the light switch.

1. Pull bulb holder from light housing -Arrow A-.





Pulling out bulb holder and removing bulb.

2. Remove bulb from bulb holder -Arrow B-.

Installing

Installing light bulb in rearview mirror

1. Insert bulb into bulb holder -Arrow A-.





Installing light bulb for door mirror

Information

- When inserting bulb holder, ensure that the marking -Arrow C- is opposite the locking tab -Arrow D-.





Installing light bulb for door mirror

2. Insert bulb holder into light housing -Arrow B-.

Installing light in rearview mirror

1. Press light into mirror housing -Arrow A- until locking tabs -Arrows B- are felt to engage.





Pressing light into mirror housing

2. Pull line through mirror cover -Arrows-.





Pulling line through mirror cover

3. Install lower mirror housing. -> 667919 Removing and installing housing for rear-view mirror - section on "installing" 667919 Removing and installing housing for rear-view mirror
4. Push plug connection together -Arrows A- until the locking lug -Arrow B- is felt to engage.





Pushing plug connection together and inserting into holder

5. Insert plug connection into holder -Arrow C- until it is felt to engage.

Subsequent work

1. Install upper mirror housing. -> 667919 Removing and installing housing for rear-view mirror - section on "installing" 667919 Removing and installing housing for rear-view mirror
2. Install mirror glass. -> 667819 Removing and installing mirror glass - section on "installing" 667819 Removing and installing mirror glass