721619 Removing and Installing Front Seat Trim

WM 721619 Removing and installing front seat trim

Removing front seat trim









1. Move front seat forward until fastening screws of front trim are accessible.
2. Pull out seat belt cap at the front side -Arrow A- and take out to the front -Arrow B-.





3. Unscrew fastening screws -arrows-.





4. Fold trim outward -Arrow A-.





5. Unlock the two connectors -Arrow B- and remove from the seat adjustment switch -Arrows C-.





Information

- The number of plugs can vary, depending on the equipment.

6. Detach backrest cover on the outer side trim -Arrow A-.





7. Push pins of expanding clips -B- out towards the inside and remove the expanding clips.





8. Pull outer side trim off belt guide.





Information

- If the retaining bracket becomes loose from the side trim during removal, it must be refitted to the side trim for installation.

9. Detach backrest cover on the inner side trim -Arrow A-.





10. Push pins of expanding clips -B- out towards the inside and remove the expanding clips.





11. Release inner trim at front using a commercially available screwdriver -Arrow A-.





12. Pull trim at bottom outward -Arrow B- and lift it up and out -Arrow C-.






Installing front seat trim

1. Engage inner side trim onto the seat frame from above -Arrow A-.





2. Push lock inward -Arrow C- , then push in the trim at the bottom -Arrow B-.





3. Insert expanding clips -A- and push in the pins.





4. Engage backrest cover on side trim -B-.





5. Push outer side trim onto belt guide.





6. Insert expanding clips -A- and push in the pins.





7. Engage backrest cover on the outer side trim -B-.





8. Insert the two plugs into the seat adjuster switch -A- and swivel trim back to the installation position -B-.





Information

- The number of plugs can vary, depending on the equipment.

9. Screw front trim into place -arrows-.





10. Insert seat belt cap on the front trim -Arrow A- and push in -Arrow B- until it can be felt to engage.