722619 Removing and Installing Cover For Backrest

WM 722619 Removing and installing cover for backrest

Removing cover for backrest





1. Pull plastic strips on seat frame forwards and disengage -Arrow A-.





2. Disengage rubber strap on inside -Arrow B- of seat frame.





3. Using a screwdriver -C- , lever out the clip -D- and remove rubber strap from clip.





4. Disengage cover at side trim on inside -Arrow A- and outside -Arrow B-.





5. Pull cover rearward at the top to unclip it -Arrow A- and lift it up and out -Arrow B-.






Installing cover for backrest

1. Engage cover on the backrest frame at the bottom -Arrow A- and push it in at the top -Arrow B- until the cover can be felt to engage.





2. Engage rubber strap at the inside on the fastening clip -Arrow A- of the belt buckle cable and secure the fastening clip to the seat frame with the rubber strap -Arrow B-.





3. Engage plastic strips and rubber strap on outside of seat frame -A, B-.





4. Engage cover on the side trim inside and outside -A, B-.