723419 Removing and Installing Lumbar Support

WM 723419 Removing and installing lumbar support

Removing lumbar support





1. Remove lumbar adjustment cable.

-> 723619 Removing and installing motor for lumbar adjustment - section on "Removing" 723619 Removing and Installing Motor For Lumbar Adjustment and Lumbar Curvature
2. Remove lumbar curvature cable.

-> 723619 Removing and installing motor for lumbar adjustment - section on "Removing" 723619 Removing and Installing Motor For Lumbar Adjustment and Lumbar Curvature

Information

- Unclip lumbar support at top first. If the lumbar support is first disengaged at the bottom and turned towards the back, the top clips may break.

3. Using a commercially available screwdriver, lever out lumbar support at the top -arrow-.





4. Fold lumbar support forward.
5. Press holders together -Arrow A- and remove lumbar support from backrest frame -Arrow B-.






Installing lumbar support

1. Engage holders on one side of backrest frame.
2. Push holders on opposite side inwards -Arrow A- and engage on backrest frame -Arrow B-.





3. Fold lumbar support up and push into fastening clips -arrows- until they can be felt to engage.





4. Install lumbar curvature cable.

-> 723619 Removing and installing motor for lumbar adjustment - section on "Installing" 723619 Removing and Installing Motor For Lumbar Adjustment and Lumbar Curvature
5. Install lumbar adjustment cable.

-> 723619 Removing and installing motor for lumbar adjustment - section on "Installing" 723619 Removing and Installing Motor For Lumbar Adjustment and Lumbar Curvature