741019 Removing and installing padding for front seat

WM 741019 Removing and installing padding for front seat

Preliminary work

1. Remove front seat. -> 720119 Removing and installing front seat - "Removing" section 720119 Removing and Installing Front Seat
2. Remove seat-belt buckle. -> 692419 Removing and installing seat-belt buckle - "Removing" section 692419 Removing and installing front seat-belt buckle
3. Remove front backrest frame. -> 721919 Removing and installing front backrest frame - "Removing" section 721919 Removing and Installing Front Backrest Frame
4. Remove front seat trim. -> 721619 Removing and installing front seat trim - "Removing" section 721619 Removing and Installing Front Seat Trim

Removing padding for front seat





CAUTION

Danger of injury and material damage if airbag units are not handled correctly. Always observe the safety regulations for handling airbag units. => Safety regulations for handling airbag and.

- The airbag unit must always be deposited so that the airbag opening faces upward.
- If removed for an extended period, the airbag unit must be kept in a locked place.
- Remove ignition key. Disconnect the battery and cover battery terminal. => General information on vehicle battery.
- After the battery is disconnected, always wait for 1 minute before disconnecting the airbag plugs.

1. Disengage rear plastic strip for cover -arrows-.





2. Use a suitable angular screw driver to lever out plastic strips at front and side from retaining hooks -arrows-.





3. Remove padding and seat cover from seat frame.

Installing padding for front seat





_
1. Place padding and cover on seat frame and align with seat frame.
2. Engage cover at rear of seat frame -arrows-.





3. Using a suitable angular screw driver, engage cover at the front and side of seat frame -arrows-. Ensure plastic strips are engaged on all retaining hooks.






Subsequent work

1. Install front seat trim. -> 721619 Removing and installing front seat trim - "Installing" section 721619 Removing and Installing Front Seat Trim
2. Install front backrest frame. -> 721919 Removing and installing front backrest frame - "Installing" section 721919 Removing and Installing Front Backrest Frame
3. Install front seat-belt buckle. -> 692419 Removing and installing front seat-belt buckle - "Installing" section 692419 Removing and installing front seat-belt buckle
4. Install front seat. -> 720119 Removing and installing front seat - "Installing" section 720119 Removing and Installing Front Seat