108319 Removing and installing engine cover (design cover) on DFI engines

WM 108319 Removing and installing engine cover (design cover) on DFI engines

Preliminary work

1. Open the bonnet.

Information

Component overview





Engine mount









Throttle cover turned around






Removing engine cover (design cover)

1. Hold throttle cover on the left and right. Pull throttle cover straight up and off. -arrows-





Throttle cover

Installing engine cover (design cover)

1. Press rubber holders for throttle cover onto the five ball heads on the engine. Make sure that the rubber holders do not slip. If the throttle cover proves to be difficult to fit, spray the rubber holders with silicone spray.

Subsequent work

1. Close the bonnet.