399035 Checking and topping up oil for rear final drive

WM 399035 Checking and topping up oil for rear final drive

Tools





Technical values






Checking oil for rear final drive

WARNING

Risk of scalding from hot oil

-> Let the oil cool down
-> Wear personal protective gear (goggles, gloves)

Information

- Vehicle must be horizontal in order to check fluid level in rear final drive.

1. Unscrew oil inspection plug -A-.





Control/drain plug for rear final drive

2. The oil level is correct if the oil reaches the lower edge of the inspection window.

Information

Use only oil approved by Porsche.

3. If this is not the case, top up the oil. => 399035 Inspecting and adding oil for rear final drive - section on "Filling"
4. Screw in oil inspection plug -A- with new sealing ring.=> Tightening torque: 26 ftlb.





Control/drain plug for rear final drive

Topping up oil for final drive

WARNING

Risk of scalding from hot oil

-> Let the oil cool down
-> Wear personal protective gear (goggles, gloves)

Information

- Vehicle must be horizontal in order to fill rear final drive.

1. Unscrew oil inspection plug -A-.





Control/drain plug for rear final drive

Information

Use only oil approved by Porsche.

2. Fill with oil using the ATF filling device for filling transmission NR.161 to the lower edge of inspection plug -A-.
3. Screw in oil inspection plug -A- with new sealing ring.=> Tightening torque: 26 ftlb.





Control/drain plug for rear final drive