946719 Removing and installing bulb for fog light

WM 946719 Removing and installing bulb for fog light

Preliminary work

1. Release wheel housing liner in the front area. -> 505619 Removing and installing front wheel housing liner - section on "Removing" Service and Repair

Removing bulb for fog light

Information

- => Bulb table and installation instructions

WARNING

Risk of short circuit.

- Before removing bulb, remove ignition key and switch off light switch.

-> 1. Release connector -1- ( -arrow A- ) and pull off from fog light -2- ( -arrow B- ).





Pulling off connector from fog light

2. Turn bulb for fog light -1- anti-clockwise ( -arrow A- ) and remove from the fog light -2- ( -arrow B- ).





Removing bulb for fog light

Installing bulb for fog light

1. Insert bulb for fog light -1- into the fog light -2- ( -arrow A- ) and turn clockwise ( -arrow B- ) until the bulb for fog light -1- engages securely.





Installing bulb for fog light

2. Push connector -1- onto the fog light -2- ( -arrow- ) until the connector -1- engages securely.





Pushing connector onto fog light

Subsequent work

1. Secure wheel housing liner in the front area. -> 505619 Removing and installing front wheel housing liner - section on "Installing" Service and Repair