Power Door Lock Switch: Service and Repair

WM 577819 Removing and installing central locking switch

Removing central locking switch

Information

- Only the central locking switches on the rear switch panels can be removed and installed.

1. Lever out the entire power window switch using a plastic spatula.





Levering out power window

2. Push in electric plug -1 and 2- and remove both plugs from power window switch -a-.





Pulling off plug

3. Use two screwdrivers to press the switch panel housing apart and pull out the switch.





Removing switch

Installing central locking switch

Information

- Only the central locking switches on the rear switch panels can be removed and installed.

1. Insert the switch in the switch panel until it clicks into place.





Installing switch

2. Insert the electrical plug connection in the power window switch until it clicks into place.





Inserting the connectors

3. Position the power window switch in the door trim panel and press it in.





Installing switch for power window

4. Make sure that the power window switch is positioned evenly on the gap.