914019 Removing and installing front loudspeakers (dashboard)

WM 914019 Removing and installing front loudspeakers (dashboard)

Technical values





Removing front loudspeakers (dashboard)

Removing the Bose high-pitch loudspeaker

WARNING

Before removing loudspeakers, switch off ignition, remove ignition key and switch off audio system.

1. Use plastic spatula or similar to prise up loudspeaker cover and pivot it upwards to the windscreen.





Prising up cover of high-pitch loudspeaker

2. Unscrew the two fastening screws and lift up the loudspeaker.





Unscrewing fastening screws of of high-pitch loudspeaker

3. Release locking tab with a small screwdriver -Arrow A- and pull off loudspeaker plug -Arrow B-.





Releasing locking tab and removing connector

Removing the Bose centre speaker

WARNING

Before removing loudspeakers, switch off ignition, remove ignition key and switch off audio system.

-> 1. Carefully insert a plastic spatula at the four points between the air vent and dashboard and prise out the air vent.





Prising out the air vent

2. Press the electrical plug connection and pull off the plug.
3. Unscrew the two fastening screws next to the air outlet.





Unscrewing fastening screws for centre speaker cover

4. Carefully prise out the cover with a plastic spatula at the four points and pivot it upwards to the windscreen.





Unclipping centre speaker cover

5. Unscrew the two fastening screws and lift up the loudspeaker.





Unscrewing fastening screws for centre speaker

6. Release locking tab with a small screwdriver -Arrow A- and pull off loudspeaker plug -Arrow B-.





Releasing locking tab and removing connector

Installing front loudspeakers (dashboard)

Installing the Bose high pitch loudspeaker

1. Push in loudspeaker plug and position loudspeaker.





Connecting plug and positioning high-pitch loudspeaker

2. Secure loudspeaker with the two fastening screws. => Tightening torque: 1.0 ftlb.
3. Engage loudspeaker cover near windscreen in dashboard, pivot down and clip in place.





Clipping high-pitch loudspeaker cover into place

Installing the Bose centre speaker

1. Push in loudspeaker plug and position loudspeaker.





Inserting centre speaker plug and positioning loudspeaker

2. Secure loudspeaker with the two fastening screws. => Tightening torque: 1.0 ftlb.
3. Engage center section cover in dashboard and clip in at the four points.





Clipping centre speaker cover into place

4. Screw in the front fastening screws. => Tightening torque: 1.0 ftlb.





Screwing in fastening screws for centre speaker cover

5. Position the middle air vent and press into the dashboard until the air vent engages.