Operation CHARM: Car repair manuals for everyone.

668919 Removing and Installing Rear-View Mirror


WM 668919 Removing and installing rear-view mirror

Tools





Technical values





Removing rear-view mirror





1. Remove front door trim. -> 705919 Removing and installing front door trim - section on "Removing" 705919 Removing and Installing Front Door Trim Panel
2. Release -Arrow A- and remove -Arrow B- electric connector from power window motor.





3. Unclip wiring harness with a loosening lever disassembly tool, universal NR.21 -Arrows A- and detach one side of the adhesive felt -Arrow B-.





4. Unscrew fastening screws -Arrows 1-.





5. Lift mirror -Arrow A- and unclip retaining pivot -B-.





6. Fold mirror downward -arrow C- and remove.





Installing rear-view mirror





1. Attach mirror to window channel -Arrow A- and fold upward and inward -Arrow B-.





2. Press mirror downward until the retaining pivot -C- engages in the window frame.





3. Screw down mirror on door frame -1-. => Tightening torque: 10 Nm (7.5 ftlb.)





4. Clip wiring harness onto door inner panel -Arrow A- and fasten with adhesive felt -Arrow B-.





5. Fit connector to power window motor -Arrow A- and press in until the locking tab -Arrow B- is felt to engage.





6. Install door trim panel. -> 705919 Removing and installing front door trim - section on "installing" 705919 Removing and Installing Front Door Trim Panel