646619 Removing and Installing Bottom Section For Rear Window Release

WM 646619 Removing and installing bottom section for rear window release

Technical values





Removing bottom section for rear window release









Remove lining for rear lid. -> 708719 Removing and installing rear lid lining - section on "removing" 708719 Removing and Installing Lining For Rear Lid
1. Release connector -Arrow A- and disconnect plug connection -Arrows B-.





2. Release connector -arrows C- and pull off -arrow D-.





3. Unscrew fastening nuts -1- and remove lower part -arrow-.






Installing bottom section for rear window release

1. Install lower part -arrow- and tighten with fastening nuts -1-.

=> Tightening torque: 6 ftlb.





2. Push together plug connection -Arrows A- until the locking tabs -B- are felt to engage.





3. Push in connector -arrow C- until the locking tabs -arrows D- are felt to engage.