647119 Removing and installing rear power windows

WM 647119 Removing and installing rear power windows

Preliminary work

1. Remove rear door sub-frame
1.1. -> 583019 Removing and installing door sub-frame - section on "Removing" 583019 Removing and Installing Rear Door Sub-frame
2. Remove rear door window
2.1. -> 646019 Removing and installing rear door window - section on "Removing" 646019 Removing and installing rear door window
3. Remove rear power window motor
3.1. -> 646100 Removing and installing rear power window motor - section on "Removing" 646119 Removing and installing rear power window motor

Removing rear power windows









1. Removing power windows
1.1. Drill out pop rivets -1- on guide rails -2-.
1.2. Unclip power window gear -3- from the door unit carrier and remove the power window.






Installing rear power windows









1. Installing power windows
1.1. Place the power window on the door unit carrier as shown. Make sure the cable is in the correct position ( -arrow A- ).





1.2. Clip in power window gear -3- in the door unit carrier.
1.3. Fix guide rails -2- with 2 rivets each -1- and rivet with the door unit carrier.
1.4. Clip in cable to retaining clip -4-.
1.5. Apply lubricant (grease) to the guide rails -2- and move sliding pads -5- manually.






Subsequent work

1. Install rear door window
1.1. -> 646019 Removing and installing rear door window - section on "Installing" 646019 Removing and installing rear door window
2. Install rear power window motor
2.1. -> 646100 Removing and installing rear power window motor - section on "Installing" 646119 Removing and installing rear power window motor
3. Install rear door sub-frame
3.1. -> 583019 Removing and installing rear door sub-frame - section on "Installing" 583019 Removing and Installing Rear Door Sub-frame