74491902 Removing and installing padding for 2/3-split folding rear seat

WM 744919 Removing and installing padding for 2/3-split folding rear seat

Removing padding for 2/3-split folding rear seat





1. Remove rear seat. -> 724819 Removing and installing rear seat - section on "Removing" 724819 Removing and installing rear seat (single-seat look)
2. Lever out piping -2- of cover for rear seat -1- by inserting a plastic wedge into the front left corner -Arrow A-.





3. Pull piping -2- of cover for rear seat -1- out completely in direction of arrow.





4. Release wire harness for seat heater (only for vehicles with seat heater): Release connector -4- -Arrow B- and pull it off -Arrow C-.





5. Press grommet -3- with connector -4- out of the seat frame -Arrow D-.





6. Remove padding: Remove seat frame -5- from padding with cover -1- -Arrow E-.





7. Remove cover for rear seat. => Removing cover for 2/3-split folding rear seat

Installing padding for 2/3-split folding rear seat





1. Install cover for rear seat. => Installing cover for 2/3-split folding rear seat
2. Fasten wire harness for seat heater (only for vehicles with seat heater): Insert connector -4- into the seat frame and fit the grommet -3- -Arrow A-.





3. Push connector -4- into the fastening clip -Arrow B- until the locking tab -Arrow C- engages audibly.





4. Place seat frame -5- on the padding with cover -1- and align -Arrow D-.





5. Press piping -2- of cover for rear seat -1- completely into the seat frame in direction of arrow -Arrow E-.









6. Install rear seat. -> 724819 Removing and installing rear seat - section on "Installing" 724819 Removing and installing rear seat (single-seat look)