Sun Visor: Service and Repair

WM 682319 Removing and installing sun visor

Removing sun visor





1. Disengage adjustable part of the sun visor -1- from the mounting saddle and pivot towards roof frame ( -arrow A- ).





2. Release mounting saddle.
2.1. Unclip cover cap -2- on the mounting saddle -3- with a screwdriver and unfold ( -arrow B- ).
2.2. Unscrew fastening screw -4-.





3. Remove mounting saddle.
3.1. Fold rear sun visor -5- downwards ( -arrow C- ).
3.2. Carefully insert a screwdriver between roof lining and mounting saddle and unclip mounting saddle -3- ( -arrow D- ).
3.3. Remove lock -6- from mounting saddle -3- ( -arrow F- ).
3.4. Remove mounting saddle -3- in direction of arrow ( -arrow E- ).





4. Release cover for pivot bearing:
4.1. Pivot adjustable sun visor back into its normal position.
4.2. Carefully insert a screwdriver between roof lining and pivot bearing -7- ( -arrow G- ) and release cover ( -arrow H- ).





5. Remove pivot bearing.
5.1. Unscrew fastening screws -8-.





6. Remove sun visor and release electric plug connection.
6.1. Unclip sun visor -9- and carefully lower it ( -arrow I- ), until the plug -11- is accessible.
6.2. Release the locking tab -10- for the electrical plug connection ( -arrow K- ) and pull off the plug -11- ( -arrow L- ).
6.3. Remove sun visor -9-.






Installing sun visor





1. Install sun visor.
1.1. Move sun visor -9- into installation position ( -arrow A- ).
1.2. Insert plug for mirror light -11- ( -arrow B- ).
1.3. Clip in sun visor -9- completely ( -arrow A- ).





2. Install pivot bearing.
2.1. Screw in fastening screws -8-.





3. Clip in cover for pivot bearing.
3.1. Align and engage cover for pivot bearing -7- 4 ( -arrow C- ).





4. Move adjustable sun visor to lateral position.
4.1. Swivel adjustable part of the sun visor -1- towards roof frame ( -arrow D- ).
4.2. Leave sun visor -5- in unfolded position.





5. Install mounting saddle.
5.1. Insert lock -6- in mounting saddle -3- ( -arrow E- ).
5.2. Engage mounting saddle -3- at the top on the roof liner ( -arrow F- ).
5.3. Swivel mounting saddle -3- forwards towards the windscreen and clip in place ( -arrow G- ).
5.4. Pivot sun visor -5- towards roof liner (normal position) ( -arrow H- ).





6. Fasten mounting saddle.
6.1. Unclip cover cap -2- on the mounting saddle -3- with a screwdriver ( -I- ) and unfold ( -arrow K- ).
6.2. Screw in fastening screw -4- and tighten.
6.3. Close -2- cover cap -arrow L-.





7. Move swivelling sun visor to original position:
7.1. swivel adjustable part of the sun visor -1- towards windscreen ( -arrow M- ).