645219 Removing and installing front power windows
WM 645219 Removing and installing front power windows
Technical values
Preliminary work
1. Remove door sub-frame. -> 573019 Removing and installing door sub-frame - section on "removing" 573019 Removing and Installing Door Sub-frame
2. Remove front door window. -> 644019 Removing and installing front door window - section on "removing" 644019 Removing and installing front door window
Removing front power windows
Installation position of front power windows
1. Remove rubber sleeves -1-.
Removing rubber sleeve
2. Unclip cable at retaining clip -1-.
Unclipping cable
3. Unscrew fastening nuts -2- on power windows -1-.
Releasing power windows
4. Fold power windows -1- together and remove through the door opening -arrow-.
Removing power windows
Installing front power windows
Installation position of front power windows
1. Fold power windows -1- together and insert through the door opening -arrows-.
Installing power windows
CAUTION
Noises on the power windows due to interfacing the window lifter rails!
-> When moving the window lifter rails, they must be adjusted in parallel both during the first installation as well as during subsequent adjustment.
2. First position the lower fastening points of the power windows -1- to the dimension -X = 5 mm- and tighten with fastening nuts - 2-. Tightening torque => Final tightening : 7 ftlb.
Securing power windows
3. Then screw down the upper fastening points of the power windows -1- with the fastening nuts -2-. Tightening torque => Final tightening: 7.2 ftlb.
Securing power windows
4. Clip in cable at retaining clip -1-.
Clipping in cable
5. Fit rubber sleeves -1-.
Fitting rubber sleeve
Subsequent work
1. Install door sub-frame. -> 573019 Removing and installing door sub-frame - section on "installing" 573019 Removing and Installing Door Sub-frame
2. Install front door window. -> 644019 Removing and installing front door window - section on "installing" 644019 Removing and installing front door window