725719 Removing and installing rear lumbar support

WM 725719 Removing and installing rear lumbar support

Preliminary work

Remove padding for rear backrest. -> 745219 Removing and installing padding for rear backrest - section on "Removing" 745219 Removing and installing padding for rear backrest

Removing rear lumbar support





Installation position of rear lumbar support

1. Remove foam part from the backrest frame.
2. Remove motor for the lumbar support. -> 725819 Removing and installing motor for rear lumbar support - section on "Removing" 725819 Removing and installing motor for rear lumbar support
3. Unclip fixing clips -1-.
4. Swivel the lumbar support -2- to the side -arrow A-.





Unclipping fixing clips

5. Unplug electric plug connection.





Unplugging electric plug connection

6. Remove lumbar support complete with the valve -3-.

Installing rear lumbar support

1. Insert valve -3- into the hard foam.
2. Connect electric plug connection.





Plugging in electric plug connection

3. Position lumbar support -2- on the foam part -arrow B-.
4. Clip in fixing clips -1-.





Clipping in fixing clips

5. Install motor for the lumbar support. -> 725819 Removing and installing motor for rear lumbar support - section on "Installing" 725819 Removing and installing motor for rear lumbar support
6. Insert foam part into the backrest frame.

Subsequent work

Install padding for rear backrest. -> 745219 Removing and installing padding for rear backrest - section on "Installing" 745219 Removing and installing padding for rear backrest