Removing and Installing Motor For Front Vertical Adjustment

Removing And Installing Motor For Front Vertical Adjustment

Technical values







Information

Installation position of motor for front vertical adjustment







Preliminary work

1. Remove front seat.

Removing motor for front vertical adjustment







1. Pull off connector -1- on motor for front vertical adjustment -3- .
2. Unscrew the two fastening screws -2- and remove motor for front vertical adjustment -3- .







3. Pull the drive shaft -1- out of the transmission mount -2- and check it for damage.

Installing motor for front vertical adjustment







1. Insert the drive shaft -1- into the transmission mount by turning it slightly -2- .







2. Slide motor for front vertical adjustment -3- onto the drive shaft by turning it slightly and secure with the two fastening screws -2- .
- Tightening torque: 7 Nm (5 ftlb.)

3. Plug in connector -1- on motor for front vertical adjustment -3- until it engages securely.

Subsequent work

1. Install front seat.