745619 Removing and installing load-through system

WM 745619 Removing and installing load-through system

Preliminary work

Remove rear backrest. -> 724719 Removing and installing rear backrest - section on "Removing" 724719 Removing and installing rear backrest

Removing load-through system





Installation position of load-through system

1. Release and fold over the load-through system.
2. Unscrew bearing pin -1- ( -arrow A- ).





Unscrewing bearing pin

3. Remove load-through system -arrow B-.

Installing load-through system

1. Slide in load-through system using the sleeve -arrow C-.
2. Tighten bearing pin -1- ( -arrow D- ).





Tightening bearing pin

3. Fold over and lock the load-through system.

Subsequent work

Install rear backrest. -> 724719 Removing and installing rear backrest - section on "Installing" 724719 Removing and installing rear backrest