6X00IN Safety instructions

WM 6X00IN Safety instructions

Safety instructions for work on car windows

Material damage when inserting the glass into car windows

CAUTION

Danger of material damage if specified curing time of adhesive is not observed! In order to ensure that the bonded joint is sufficiently strong, the following boundary conditions must be adhered to:

- The vehicle must not be used until the curing time has elapsed.
- Curing time: 3 hours
- Temperature: at least 10 °C
- Fixing time: approx. 1 hour

->

Safety instructions for installation work

Safety instructions for the heat shield

NOTICE

Heat protection panels not fitted correctly

- Risk of damage to adjacent parts

-> Make sure the heat protection panels overlap correctly.
-> Replace damaged or distorted heat protection panels.
-> Check heat protection panels for deformation, fixing of the aluminium braided cord, tears and missing or damaged fixing tabs.
-> More than 80% of the total sealing area must be sealed without gaps.