947119 Removing and installing auxiliary headlight

WM 947119 Removing and installing auxiliary headlight

Technical values





Preliminary work

1. Remove front part of front wheel housing liner. -> 505619 Removing and installing front wheel housing liner - section on "Removing" Removal and Replacement

Removing auxiliary headlight

1. Release and disconnect connector on auxiliary headlight -a-.





Removing connector

2. Unscrew the three fastening screws -1- and remove the auxiliary headlight from the front apron by moving it to the rear.





Unscrewing fastening screws

Installing auxiliary headlight

1. Fit auxiliary headlight into the front apron from behind and screw in the three fastening screws -1-. => Tightening torque: 2.8 Nm (2.0 ftlb.)





Screwing in fastening screws

2. Plug in connector until it engages securely.





Inserting connector

Subsequent work

1. Install front part of front wheel housing liner. -> 505619 Removing and installing front wheel housing liner - section on "Installing" Removal and Replacement