242519 Removing and installing air cleaner housing

WM 242519 Removing and installing air cleaner housing

Technical values





Preliminary work

1. Remove front apron. -> 631519 Removing and installing front apron
2. Remove air box for air cleaner. -> 242719 Removing and installing air box for air cleaner 242719 Removing and installing air box for air cleaner
3. Remove air guide for air cleaner. -> 243619 Removing and installing front air guide at the side 243619 Removing and installing front air guide at the side

Removing air cleaner housing

1. Unclip sensor for garage door opener if necessary. => Garage door sensor





Garage door sensor

2. Remove four fastening screws on the air cleaner housing.





Air cleaner housing mounting





Installing air cleaner housing

1. Move air cleaner housing into installation position.





Air cleaner housing mounting





2. Screw in and tighten four fastening screws. => Tightening torque: 5 Nm (3.5 ftlb.)
3. Clip in sensor for garage door opener if necessary. => Garage door sensor





Garage door sensor

Subsequent work

1. Fit air box for air cleaner. -> 242719 Removing and installing air box for air cleaner 242719 Removing and installing air box for air cleaner
2. Fit air guide for air cleaner. -> 243619 Removing and installing front air guide at the side 243619 Removing and installing front air guide at the side
3. Fit front apron. -> 631519 Removing and installing front apron