Rear Bumper: Service and Repair

WM 635019 Removing and installing rear bumper

Technical values





Preliminary work

1. Remove rear apron. -> 635519 Removing and installing rear apron - section on "Removing"

Removing rear bumper

1. Unscrew fastening screws -1-.





Removing bumper

2. Remove the bumper.

Installing rear bumper

1. Fit the bumper.
2. Screw in fastening screws -1- and tighten to the specified torque => Tightening torque: 65 Nm (48 ftlb.)+/-6.5 Nm (+/-5.0 ftlb.).





Installing bumper

Subsequent work

1. Install rear apron. -> 635519 Removing and installing rear apron - section on "Installing"