667919 Removing and installing housing for rear-view mirror

WM 667919 Removing and installing housing for rear-view mirror

Preliminary work

Preliminary work for removing and installing housing for rear-view mirror

1. Remove mirror glass. -> 667819 Removing and installing mirror glass - section on "Removing" 667819 Removing and installing mirror glass
2. Remove mirror adjusting motor. -> 668219 Removing and installing mirror adjusting motor - section on "Removing" Service and Repair

Preliminary work for removing and installing housing for rear-view mirror base

1. Remove mirror glass. -> 667819 Removing and installing mirror glass - section on "Removing" 667819 Removing and installing mirror glass
2. Remove mirror adjusting motor. -> 668219 Removing and installing mirror adjusting motor - section on "Removing" Service and Repair
3. Remove rear-view mirror. -> 668919 Removing and installing rear-view mirror - section on "Removing" 668919 Removing and installing rear-view mirror

Removing housing for rear-view mirror

1. Unscrew fastening screws -1- and -2- for upper part of rear-view mirror housing.





Loosening fastening screws for housing

2. Unscrew fastening screw -2- for lower part of rear-view mirror housing.





Loosening fastening screw for lower part

3. Release the locking lug -3- ( -A- ) and remove lower part of rear-view mirror housing -B-.





Removing lower part

4. Lift up upper part of rear-view mirror housing -A- and swivel it out -B-.





Removing upper part

Installing housing for rear-view mirror

1. Swivel in rear-view mirror housing -A- and guide it into the base -B-.





Installing upper part

2. Screw in fastening screws -1- and -2- on the upper part.





Securing upper part

3. Fit lower part -A- and clip it in -B-.





Clipping in lower part

4. Screw in fastening screw -2- on lower part.





Securing lower part

Removing housing for rear-view mirror base

1. Remove housing for rear-view mirror.
2. Unscrew fastening screw -1-.





Detaching seal at the mounting point

3. Remove seal.





Removing seal

4. Remove seal from the underside.





Removing seal from the underside

5. Guide housing for mirror base down -A- and remove it -B-.





Removing housing for mirror base in downward direction

Installing housing for rear-view mirror base

1. Fit housing for mirror base -A- and place in installation position -B-.





Positioning housing for mirror base

2. Place seal in installation position.





Positioning seal

3. Screw in fastening screw -1-.





Screwing in fastening screw

4. Place seal in installation position on the underside.





Positioning seal on underside

5. Install housing for rear-view mirror.

Replacing light bulb in rear-view mirror

1. Remove lower part of housing for rear-view mirror.
2. Unclip plug connection for light bulb from the bracket -A-.





Unclipping plug connection

3. Disconnect plug connection -B-.
4. Release light bulb -A- and remove it -B-.





Removing light bulb

5. Fit light bulb -A- and clip it in -B-.





Fitting light bulb

6. Connect plug connection -A- and clip it into the bracket -B-.





Connecting plug connection

Subsequent work

Subsequent work for removing and installing housing for rear-view mirror

1. Install mirror adjusting motor. -> 668219 Removing and installing mirror adjusting motor - section on "Installing" Service and Repair
2. Install mirror glass. -> 667819 Removing and installing mirror glass - section on "Installing" 667819 Removing and installing mirror glass

Subsequent work for removing and installing housing for rear-view mirror base

1. Install rear-view mirror. -> 667919 Removing and installing rear-view mirror housing - section on "Installing"
2. Install mirror adjusting motor. -> 668219 Removing and installing mirror adjusting motor - section on "Installing" Service and Repair
3. Install mirror glass. -> 667819 Removing and installing mirror glass - section on "Installing" 667819 Removing and installing mirror glass