Removing and Installing Padding For Rear Seat Surface

Removing And Installing Padding For Rear Seat Surface

Information

Component information







Removing padding for rear seat surface

1. Remove cover for rear seat.
2. Rear seats with seat-surface extension: Remove seat-surface extension.

Removing padding for rear seat surface (air conditioning)

1. Remove cover for rear seat.
2. Remove suction fan for rear seat surface.
3. Remove heating element.
4. Remove seat-surface extension.
Only for seats with seat-surface extension

Removing padding for rear seat-surface extension

1. Remove cover for rear seat.







2. Detach the padding from the seat frame in the bonding area using a Stanley knife.







3. Remove remaining adhesive -1- and clean the contact surface of the seat frame with cleaning solution.

Installing padding for rear seat surface

1. Rear seats with seat-surface extension: Install seat-surface extension.
2. Fit cover for rear seat.

Installing padding for rear seat surface (air conditioning)

1. Rear seats with seat-surface extension: Install seat-surface extension.
2. Position the heating element.
3. Install suction fan for rear seat surface.
4. Fit cover for rear seat.

Installing padding for rear seat-surface extension

INFORMATION: The padding for the seat-surface extension must be clean and free of grease.

1. Apply adhesive to the surface of the padding.







2. Press the padding on from above -arrow- .
3. Fit cover for rear seat.