725819 Removing and installing motor for rear lumbar support

WM 725819 Removing and installing motor for rear lumbar support

Preliminary work

Remove padding for rear backrest. -> 745219 Removing and installing padding for rear backrest - section on "Removing" 745219 Removing and installing padding for rear backrest

Removing motor for rear lumbar support





Installation position of motor for lumbar support

1. Remove the hard foam insert complete with lumbar support.





Removing hard foam insert

2. Unplug electric plug connection -2-.
3. Unplug pneumatic plug connection -3- at the lumbar valve.
4. Remove the motor -1- together with the bracket.





Removing motor

Installing motor for rear lumbar support

1. Plug in electric plug connection -2-.
2. Route the electric line as required and position the motor -1-.
3. Plug in pneumatic plug connection -3- on the lumbar valve.





Plugging in connections

4. Fit the hard foam insert complete with lumbar support into the backrest frame.





Fitting hard foam insert

Subsequent work

Install padding for rear backrest. -> 745219 Removing and installing padding for rear backrest - section on "Installing" 745219 Removing and installing padding for rear backrest