726319 Removing and installing locking mechanism for rear backrest

WM 726319 Removing and installing locking mechanism for rear backrest

Technical values





Preliminary work

1. Remove padding for rear backrest. -> 745219 Removing and installing padding for rear backrest - section on"Removing" 745219 Removing and installing padding for rear backrest
2. Remove lock for rear-seat backrest. -> 726819 Removing and installing lock for rear-seat backrest - section on "Removing" 726819 Removing and installing lock for rear-seat backrest

Removing locking mechanism for rear backrest





Installation position of rear locking mechanism

1. Remove foam part -arrow A- of headrest.
2. Unclip locking lug of headrest support -1- and remove it -arrow B-.





Unclipping headrest support

3. Unscrew fastening screw on retaining bracket for lock.





Remove retaining bracket

4. Unscrew fastening screws on the locking mechanism at the front.
5. Turn the backrest frame and unscrew the two fastening screws on the rear side.





Unscrewing fastening screws on locking mechanism

6. Release the cable holder and remove it by pulling it upwards through the backrest frame.





Removing cable holder

7. Remove complete locking mechanism for rear backrest.

Installing locking mechanism for rear backrest

1. Position locking mechanism for rear backrest.
2. Insert the cable holder through the backrest frame and engage it in the guide.





Installing cable holder

3. Screw in rear fastening screws.
4. Screw in front fastening screws.





Screwing in fastening screws on locking mechanism

5. Tighten the fastening screws to the specified tightening torque.=> Tightening torque: 3.2 Nm (2 ftlb.)
6. Screw in fastening screw on retaining bracket for lock and tighten to the specified tightening torque.=> Tightening torque: 5 Nm (3.5 ftlb.)





Installing retaining bracket

7. Slide in headrest support -1- ( -arrow A- ) and clip in the locking lug.
8. Position the foam part -arrow B-.





Clipping in headrest support

Subsequent work

1. Install lock for rear-seat backrest. -> 726819 Removing and installing lock for rear-seat backrest - section on "Installing" 726819 Removing and installing lock for rear-seat backrest
2. Install padding for rear backrest. -> 745219 Removing and installing padding for rear backrest - section on "Installing" 745219 Removing and installing padding for rear backrest