Removing and Installing Reading Light

Removing And Installing Reading Light

Information

Component information







Removing reading light

1. Unclip the reading light using a plastic wedge -A- and remove it -B-.







2. Release the plug connection -a- and pull it off -A-.







Installing reading light

1. Connect plug connection until it engages securely.







2. Fit reading light -A- and clip it in -B-.







Replacing light bulb for reading light

Replacing light bulbs

NOTE:
Incorrect handling of bulbs
- Risk of damage to bulbs and the bulb housing
- Switch off ignition and remove ignition key.
- Switch off the relevant loads when changing bulbs.
- Only use bulbs listed in the bulb table.
- Only install clean bulbs that are free of grease.
- Always use a cloth or soft paper when working with bulbs.
- Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.
- In certain states, it is compulsory to carry spare light bulbs.

1. Release the light bulb holder by turning it.







2. Remove light bulb.







3. Insert the light bulb.







4. Insert the holder and lock it by turning it.