Removal and Replacement

WM 340155 Changing transmission oil

Technical values





Preliminary work for changing transmission oil

Preliminary work for transmission oil

Remove underbody panelling. -> 519219 Removing and installing cover for front underbody - section on "Removing" 519219 Removing and installing Cover For Front Underbody

Changing transmission oil

Information

- Secure vehicle to prevent it rolling away.

- To check transmission oil the vehicle must be horizontal.

1. Place a drip pan underneath.

WARNING

Hot fluid

- Danger of scalding

-> Let the fluid cool down.
-> Wear personal protective gear.

2. Unscrew oil drain plug -2- and drain transmission oil.





Oil inspection plug and oil filler screw

3. Screw in a new oil drain plug -2-. => Tightening torque: 35 Nm (26 ftlb.)





Oil inspection plug and oil filler screw

4. Unscrew oil inspection plug -1-.





Oil inspection plug and oil filler screw

Information

Use only oil approved by Porsche.

5. Fill with oil up to the bottom edge of the inspection window. -> 3X00IN Technical values, transmission [1][2]Specifications
6. Screw in a new oil inspection plug -1-. => Tightening torque: 35 Nm (26 ftlb.)





Oil inspection plug and oil drain plug

Subsequent work for changing transmission oil

Subsequent work for transmission oil

Install underbody panelling. -> 519219 Removing and installing cover for front underbody - section on "Installing" 519219 Removing and installing Cover For Front Underbody