971519 Removing and installing front wire harness

WM 971519 Removing and installing front wire harness

Preliminary work

1. Remove the front apron. -> 631519 Removing and installing front apron - section on "Removing"

Removing front wire harness

1. Release and unplug connector on sensors for ParkAssist (if connected) -b-.





Disconnecting sensors for ParkAssist

2. Release and unplug connector on auxiliary headlight -a-.





Removing connector

3. Carefully open the clips using a screwdriver.





Unclipping front wire harness





Unclipping front wire harness

4. Remove wire harness.

Installing front wire harness

1. Position wire harness and clip it in.





Clipping in front wire harness





Clipping in front wire harness

2. Plug in connector on auxiliary headlight until the connector engages securely.





Plugging in connector

3. Plug in connectors on sensors for ParkAssist (if fitted) until the connectors engage securely.





Connecting sensors for ParkAssist

Subsequent work

1. Install the front apron. -> 631519 Removing and installing front apron - section on "Installing"