97321901 Removing and installing wire harness for door in front door sub-frame

WM 973219 Removing and installing wire harness for door in front door sub-frame

Information

Component information - front door





Installation position of wire harness for front door





Preliminary work

Preliminary work for front door sub-frame

1. Remove front door sub-frame. -> 573019 Removing and installing front door sub-frame - section on "Removing" 573019 Removing and Installing Front Door Sub-Frame

Removing wire harness for door in front door sub-frame

Information

The number of plug connections can vary, depending on equipment.

1. Disconnect electric plug connections.
1.1. Release electric plug connection at the bracket -1- ( -A- ) and pull it off -B-.





Disconnecting connector on door control unit

1.2. Release electric plug connections -2- , -3- for door wire harness at the door control unit -a- and pull them off -C- , -D-.
1.3. Release electric plug connection for power windows motor -a- and pull it off -B-.





Pulling off connector on power windows motor

1.4. Release electric plug connection for pressure sensor -a- and pull it off -B-.





Pulling off connector on pressure sensor

1.5. Release electric plug connection for woofer -a- and pull it off -B-.





Pulling off connector on woofer

2. Unclip fixing clips for wire harness at the inside.





Removing inner fixing clips

3. Unclip fixing clip at the outside -A-.





Removing outer fixing clip

4. Press rubber sleeves out of the opening in the door sub-frame -B-.
5. Guide wire harness out of the door sub-frame.

Installing wire harness for door in front door sub-frame

Information

The number of plug connections can vary, depending on equipment.

1. Guide wire harness into the door sub-frame.
2. Clip in fixing clip for wire harness for door sub-frame at the outside.





Securing wire harness to the outside

3. Press rubber sleeves into the opening in the door sub-frame. Check that they are seated securely.
4. Clip in fixing clips for wire harness for door sub-frame at the inside.





Securing wire harness at the inside

5. Plug in electric plug connections.
5.1. Plug in electric plug connection for pressure sensor until it engages securely.





Plugging in connector on pressure sensor

5.2. Plug in electric plug connection for power windows motor until it engages securely.





Plugging in connector for power windows motor

5.3. Plug in electric plug connection for woofer until it engages securely.





Plugging in connector for woofer

6. Plug in electric plug connections on the door control unit.





Plugging in connector on door control unit

6.1. Clip electric plug connection into the bracket -A-.
6.2. Plug in electric plug connection on the door control unit -B- and -C- until it engages securely.
6.3. Plug in and lock electric plug connection on the door control unit -D-.

Subsequent work

Subsequent work for front door sub-frame

1. Install front door sub-frame. -> 573019 Removing and installing front door sub-frame - section on "Installing" 573019 Removing and Installing Front Door Sub-Frame