Exhaust Manifold Seal and Mount

Exhaust manifold seal and mount on naturally aspirated engine, cylinders 1 to 4

1 - Exhaust manifold
2 - Exhaust manifold seal
3 - Studs M8;
5 - Hexagon nut, M8; replace; (check nuts by clicking once); observe correct tightening sequence -> Tightening torque: 27 Nm (20 ftlb.) (check nuts by clicking once)
A - M6 screw; heat shield to exhaust manifold; -> Tightening torque: 10 Nm (7.5 ftlb.)





Exhaust manifold seal and mount on naturally aspirated engine, cylinders 5 to 8

1 - Exhaust manifold
2 - Seal
3 - Hexagon nut, M8; replace; (check nuts by clicking once); observe correct tightening sequence -> Tightening torque: 27 Nm (20 ftlb.) (check nuts by clicking once)
4 - M6 screw; heat shield to exhaust manifold; -> Tightening torque: 10 Nm (7.5 ftlb.)