Removing and Installing Control Unit For Reversing Camera

Removing And Installing Control Unit For Reversing Camera

Preliminary work

1. Remove side trim panel for rear luggage compartment on the right-hand side.

Removing control unit for reversing camera

1. Open the lever on the support -2- ( -A- ) and remove the control unit for the reversing camera -1- ( -B- ).







2. Release the electric plug connection -3- ( -a- ), slide the locking mechanism to the side -C- and pull off the connector -D-.







3. Release and pull off electric plug connections -4- ( -b- ).


Installing control unit for reversing camera

1. Plug in electric plug connections -4- until they engage securely.







2. Plug in the electric plug connection -3- ( -A- ) and close the locking mechanism -B- until it locks securely.

3. Insert control unit for reversing camera -1- into the support -2- ( -C- ) and close the lever on the support -D-.







Subsequent work

1. Secure side trim panel for rear luggage compartment on the right side.