Overhaul

Replacing Rear Door

Technical values







Disassembling rear door







1. Remove rear door sub-frame.
2. Remove rear door lock.
3. Remove rear door handle.
4. Remove rear door arrester.







5. Install ball joint -1- for rear door arrester.
5.1. Screw off fastening nut and remove ball joint.

6. Remove bottom rubber seal for rear door.
7. Remove rear door.
8. Remove section of door hinge at the door side.

Assembling rear door







1. Install ball joint for rear door arrester.
1.1. Insert and screw in ball joint -1- .
- Tightening torque: 46 Nm (34 ftlb.)±5 Nm (±3.5 ftlb.)

2. Install rear door arrester.
3. Install section of door hinge at the door side.
4. Install rear door.
5. Install rear door handle.
6. Install rear door lock.
7. Install rear door sub-frame.
8. Install front rubber seal for rear door.
9. Install rear rubber seal for rear door.
10. Install bottom rubber seal for rear door.
11. Adjust the rear door.