726819 Removing and installing lock for rear-seat backrest

WM 726819 Removing and installing lock for rear-seat backrest

Technical values





Removing lock for rear-seat backrest





Installation position of lock for rear-seat backrest

1. Fold down the backrest.
2. Unscrew fastening screws on the cover.





Unscrewing fastening screws on cover

3. Release cover -arrow A- and then remove it sideways -arrow B-.





Removing cover

4. Unscrew fastening screws on the lock.





Unscrewing fastening screws on lock

5. Release the cable -a- ( -arrow D- ) and disconnect it -arrow E-.





Disconnecting cable

6. Remove lock for rear-seat backrest -arrow C-.

Installing lock for rear-seat backrest

1. Insert the cable -a- ( -arrow F- ) and lock it -arrow G-.





Inserting cable

2. Position the lock on the seat -arrow H-.
3. Screw in fastening screws on the lock and tighten to the specified tightening torque. => Tightening torque: 23 Nm (17 ftlb.)2.5 Nm (2 ftlb.)





Tightening fastening screws on lock

4. Fit cover at the sides -arrow I- and clip it in -arrow J-.





Clipping in cover

5. Screw in fastening screws on the cover.





Screwing in fastening screws on cover

6. Fold up the backrest and move it into position.