611419 Removing and installing water drip pan

WM 611419 Removing and installing water drip pan

Technical values





Preliminary work

Remove convertible top. -> 610119 Removing and installing convertible top - section on "Removing" Removal and Replacement

Removing water drip pan





Installation position of water drip pan

1. Pull seal for convertible-top compartment lid up slightly close to the water drip pan.
2. Unscrew fastening screw -1- and remove support -2-.





Removing water drip pan

3. Push out plug -3-.
4. Disconnect water drip pan -4- at the bottom from water drain tube -arrow A- and remove upwards -arrow B-.

Installing water drip pan





Installation position of water drip pan

1. Guide water drip pan -1- into position from above -arrow A- and insert into water drain tube at the bottom -2- ( -arrow B- ).





Installing water drip pan

2. Press in plug -3-.
3. Position support -4- on water drip pan -1- and screw fastening screw -5- in but do not tighten.
4. Adjust support -4-. -> 610115 Adjusting convertible top
5. Tighten fastening screw -5-. Tightening torque => Tightening torque: 23 Nm (17 ftlb.)
6. Press in seal for convertible-top compartment lid close to the water drip pan.

Subsequent work

Install convertible top. -> 610119 Removing and installing convertible top - section on "Installing" Removal and Replacement