681219 Removing and installing lid for glove compartment

WM 681219 Removing and installing lid for glove compartment

Preliminary work

Remove glove compartment. -> 681519 Removing and installing glove compartment - section on "removing" 681519 Removing and installing glove compartment

Removing lid for glove compartment





Installation position of glove compartment lid

1. Open the glove compartment.
2. Press shock absorber for glove compartment -1- carefully out of the fastening tab -2-.





Pressing out shock absorber for glove compartment

3. Turn stop -1- 45° in -direction of arrow- and remove it.





Removing stop

4. Drive out pin rod -3- , remove washer -4- and then detach the lid -1- from the glove compartment -2- ( -direction of arrow- ).





Removing lid for glove compartment

Installing lid for glove compartment





Installation position of glove compartment lid

1. Check rubber stops to the left and right -2- before installing the glove compartment lid -1- and replace them if necessary.





Checking rubber stops

2. Position lid -1- and washer -4- on the glove compartment -2- and press in the pin rods -3- ( -arrows- ).





Installing lid for glove compartment

3. Close the glove compartment slightly, position stop -1- on the lid and turn 45° in -direction of arrow-.





Installing stop

4. Press shock absorber for glove compartment -1- into the fastening tab -2-.





Pressing in shock absorber for glove compartment

5. Close glove compartment.

Subsequent work

Install glove compartment. -> 681519 Removing and installing glove compartment - section on "installing" 681519 Removing and installing glove compartment