702419 Removing and installing front side section trim

WM 702419 Removing and installing front side section trim

Technical values





Removing front side section trim

Removing front side section trim panel (driver's side)

1. Remove fuse carrier cover -1- -Arrow A-.





Removing front side section trim panel (driver's side).

2. Unscrew fastening screws -2- and remove side section trim panel -3- -Arrow B-.

Removing front side section trim panel (passenger's side).

1. Partly loosen carpet -1- at the bottom in the area of the A-pillar -Arrow A-.





Removing front side section trim panel (passenger's side)

2. Unscrew plastic nuts -2- and remove side section trim panel -3- -Arrow B-.

Installing front side section trim

Installing front side section trim panel (passenger's side)

1. Position side section trim panel -3- -Arrow A- and screw down with the plastic nuts -2-.





Installing front side section trim panel (passenger's side)

2. Fasten carpet -1- at the bottom in the area of the A-pillar -Arrow B- Double-sided adhesive tape or suitable adhesive.

Installing front side section trim panel (driver's side)

1. Insert side section trim panel -3- use -Arrow A- and screw down with the fastening screws -2-. => Tightening torque: 2.0 ftlb.





Installing front side section trim panel (driver's side)

2. Insert the fuse carrier cover -1- with both clips -4- into the lateral side section trim panel -2- and clip in -Arrow B-.