721619 Removing and installing control module trim panel

WM 721619 Removing and installing control module trim panel

Technical values





Removing control module trim panel

Preliminary work

1. Remove front seat. => 720119 Removing and installing front seat - section on "Removing"

Removing control part trim panel





Installation location for control part trim panel

1. Unscrew front fastening screws 1 from the control part trim panel2.





Unscrewing front fastening screw

2. Unscrew rear fastening screws 1 from the control part trim panel2.





Unscrewing the rear fastening screw

3. Pull out control part trim panel 2 from the cushion in direction of arrow.





Pulling out control part trim panel

4. Disconnect electric plug connection 3 and 4 , unscrew fastening screws 5 from the tip switch 6 and take off the tip switch from the control part trim panel 2.





Disconnecting electrical plug connection

Removing control part trim panel (with mechanical lever)

1. Press out trim panel 7 using a plastic spatula.





Pressing out trim panel

2. Unscrew fastening screw 8 from the lever 9 and remove lever.





Unscrewing fastening screw

3. Removing control part trim panel, work step 1, 2, 3
4. Disconnect electric plug connection 10 by pressing together the lugs arrow.





Disconnecting electrical plug connection

Installing control module trim panel

Installing control part trim panel

1. Position tip switch 6 on the control part trim panel 2 and screw down with the fastening screws 5. Plug in electrical plug connection 3 and 4.





Connect electrical plug connection

2. Insert control part trim panel 2 into the cushion in direction of arrow.





Positioning control part trim panel

3. Screw down rear control part trim panel 2 with the fastening screws 1. => Tightening torque: 2 ftlb.





Screwing down rear control part trim panel

4. Screw down front control part trim panel 2 with the fastening screws 1. => Tightening torque: 2 ftlb.





Screwing down front control part trim panel

Installing control part trim panel (mechanical)

1. Connect electrical plug connection 10.





Connecting the electrical plug connection

2. Procedure: Installing control part trim panel, work step 2, 3, 4
3. Position lever 9 on seat, screw down fastening screw 8. => Tightening torque: 4.5 ftlb.





Screwing down lever

4. Press in trim panel.





Pressing in trim panel

Subsequent work

1. Install front seat. => 720119 Removing and installing front seat - section on "Installing"