Marker Lamp: Service and Repair

WM 942719 Removing and installing light bulb for marker light

Technical values





Preliminary work

1. Remove the front apron. -> 631519 Removing and installing front apron - section on "Removing"
2. Remove spray nozzle. -> 92721900 Removing and installing spray nozzle for headlight cleaning system - section on "Removing" Service and Repair
3. Remove auxiliary headlights. -> 947119 Removing and installing auxiliary headlights - section on "Removing" 947119 Removing and installing auxiliary headlight

Removing light bulb for marker light

1. Unscrew the two fastening screws -1- and remove the cover.





Unscrewing fastening screws

2. Unplug electric connector.





Unplugging electric connector

Installing light bulb for marker light

1. Connect electric connector.





Connecting electric connector

2. Fit cover (pay attention to guide pins) and screw in the two fastening screws -1-. => Tightening torque: 1.5 Nm (1.0 ftlb.)





Screwing in fastening screws

Subsequent work

1. Install auxiliary headlights. -> 947119 Removing and installing auxiliary headlights - section on "Installing" 947119 Removing and installing auxiliary headlight
2. Install spray nozzle. -> 92721900 Removing and installing spray nozzle for headlight cleaning system - section on "Installing" Service and Repair
3. Install the front apron. -> 631519 Removing and installing front apron - section on "Installing"