576519 Removing and Installing Rubber Seal for Door

WM 576519 Removing and installing rubber seal for door

Preliminary work

1. Remove door unit carrier. => 573019 Removing and installing door unit carrier - section on "removing"
2. Remove rear-view mirror. => 668919 Removing and installing rear-view mirror - section on "removing"

Removing rubber seal for door





Installation position of rubber seal for door

1. Bore out tubular rivet -1-.





Boring out tubular rivet

2. Carefully pull the rubber seal out of the clips along the door contour.





Unclipping rubber seal

3. Pull the rubber seal off the bead of the door channel.





Pulling off rubber seal

Installing rubber seal for door





Installation position of rubber seal for door

Information

- Pay attention to correct assembly (water drain).

1. Position the rubber seal in the bead of the door channel and press it on.





Pressing in rubber seal

2. Position rubber seal at the top edge of the door and push it on.





Clipping in rubber seal

3. Clip in the rubber seal along the door contour.
4. Fasten rubber seal -1- with the tubular rivet -2-.





Fasten rubber seal.

Subsequent work

1. Install rear-view mirror. => 668919 Removing and installing rear-view mirror - section on "installing"
2. Install door unit carrier. => 573019 Removing and installing door unit carrier - section on "installing"