Auxiliary Input / Output Jack: Service and Repair

WM 912219 Removing and installing multimedia interface

Removing multimedia interface





Installation position of multimedia interface

1. Open lid of centre console storage tray.
2. Lift up and remove rubber mat.
3. Unscrew the three fastening screws -1- for the cover -2-.





Unscrewing fastening screws

4. Lift the cover -2- at the front and pull it up.
5. Lay the cover -2- aside and lift the electric line -3- out of the receptacle in the cover.





Lifting the cover

6. Release the two electric plug connections -4- and -5- ( -a- ) and pull them off.





Unplugging electric connectors

Installing multimedia interface

1. Plug in electric connectors -4- and -5- until they engage securely.





Plugging in electric connectors

2. Insert electric line -3- into the receptacles in the cover -2-.





Electric line routing

3. Fit the cover -2- and secure with the three fastening screws -1-.





Screwing down cover

4. Fit rubber mat for storage tray and close the lid.