681519 Removing and installing glove compartment

WM 681519 Removing and installing glove compartment

Technical values





Preliminary work

1. Remove right instrument panel cover. => 701619 Removing and installing instrument panel cover - section on "removing"
2. Remove trim under instrument panel at front passenger's side. => 701919 Removing and installing trim under instrument panel - section on "removing"
3. Remove right footwell light. => 961519 Removing and installing footwell light - section on "removing"
4. Remove cover (cold air bulkhead). => 702219 Removing and installing cover - section on "removing"
5. Remove right centre console cover. => 681419 Removing and installing centre console cover - section on "removing"
6. Remove cup holder. => 683019 Removing and installing cup holder - section on "removing"

Removing glove compartment





Installation position of glove compartment

1. Unscrew right fastening screws -2- from the glove compartment -1-.





Releasing glove compartment, right

2. Pull electrical lead out of glove compartment -arrow-.
3. Unscrew left fastening screws -2- from the glove compartment -1-.





Releasing glove compartment, left

4. Unscrew top fastening screws -2- from the glove compartment -1-.





Releasing glove compartment, top

5. Carefully pull out glove compartment -1- ( -arrow- ) until the electrical plug connection can be removed.
6. Pull off electrical plug connection -2- ( -arrow- ) and remove glove compartment -1- to the rear.





Disconnecting plug connection

Installing glove compartment





Installation position of glove compartment

1. Swivel in glove compartment -1- at the bottom until the electrical plug connection -2- can be connected.





Locking plug connection

2. Plug in electrical plug connection -2- ( -arrow- ).
3. Swivel glove compartment -1- into the instrument panel -arrow- and secure with the top fastening screws -2-. Tightening torque => Final tightening: 2 ftlb.





Installing glove compartment

4. Screw right fastening screws -2- into the glove compartment -1-. Tightening torque => Final tightening: 2 ftlb.





Securing the glove compartment

5. Attach electrical wire to glove compartment -arrow-.
6. Screw left fastening screws -2- into the glove compartment -1-. Tightening torque => Final tightening: 2 ftlb.





Securing glove compartment, left

Subsequent work

1. Install cup holder. => 683019 Removing and installing cup holder - section on "installing"
2. Install right centre console cover. => 681419 Removing and installing centre console cover - section on "installing"
3. Install cover (cold air bulkhead). => 702219 Removing and installing cover - section on "installing"
4. Install right footwell light. => 961519 Removing and installing footwell light - section on "installing"
5. Install trim under instrument panel at front passenger's side. => 701919 Removing and installing trim under instrument panel - section on "installing"
6. Install right instrument panel cover. => 701619 Removing and installing instrument panel cover - section on "installing"