741055 Replacing padding for front seat (folding sports bucket seat)
WM 741055 Replacing padding for front seat (folding sports bucket seat)
Preliminary work
1. Remove cover for front seat. -> 741319 Removing and installing seat cover (folding sports bucket seat) - section on "Removing" 741319 Removing and installing cover for front seat (folding sports bucket seat)
Removing padding for front seat
Removing seat cushion padding (front part)
Installation position of padding for seat (folding sports bucket seat)
1. Release Velcro fasteners -1- on the back of the padding -2- all the way around ( -Figure A- ).
Loosening cover
2. Fold cover -3- over all the way around ( -Figure B- ).
3. Carefully detach Velcro strip -1- on the cover from the Velcro fastener on the front of the padding -2- ( -arrows- ).
Removing cover
4. Take off the cover -3-.
Removing seat cushion padding (rear part)
Installation position of padding for seat (folding sports bucket seat)
1. Release Velcro fasteners -1- on the back of the padding -2- all the way around ( -Figure A- ).
Loosening cover
2. Fold cover -3- over all the way around and remove padding -2- ( -Figure B- ).
Removing padding for side bolsters
Installation position of padding for seat (folding sports bucket seat)
Information
The side bolster padding will be irreparably damaged during removal and must be replaced.
1. Loosen inner padding -1- from the seat shell -2- in the bonding area -3- ( -arrows A- ).
Loosening padding
2. Loosen padding -1- at the sides from the seat shell -2- ( -arrows B- ).
3. Remove remaining adhesive -1- and clean the contact surfaces of the seat shell -2- with cleaning agent.
Removing remaining adhesive
Installing padding for front seat
Installing padding for side bolsters
1. Apply adhesive -2- to the marked area of the padding -1-.
Applying adhesive
Information
The contact surface of the seat shell must be free from dirt and grease.
2. Place padding -1- on the seat shell -2- and straighten it -arrows A-.
Installing padding
3. Press on padding -1- in the bonding area -3- of the seat shell -2- ( -arrows B- ).
Installing seat cushion padding (rear part)
1. Insert padding -2- into the cover -3- and straighten it ( -Figure A- ).
Securing cover
2. Press on Velcro fasteners -1- on the back of the padding -2- ( -Figure B- ).
Installing padding for seat cushion (front part)
1. Position cover -3- on the front of the padding -2-.
Installing padding
2. Align Velcro strip -1- on the cover with the Velcro fastener on the padding -2- and secure it -arrows-.
3. Fold cover -3- over all the way around and straighten it ( -Figure A- ).
Securing cover
4. Press on Velcro fasteners -1- on the back of the padding -2- ( -Figure B- ).
Subsequent work
1. Install cover for front seat. -> 741319 Removing and installing seat cover (folding sports bucket seat) - section on "Installing" 741319 Removing and installing cover for front seat (folding sports bucket seat)