Cylinder Head Assembly

WM 157019 Removing and installing cylinder head - Turbo

Cylinder Head






Tightening sequence for cylinder head screws






Screw in four external Torx screws (E10) - three M6 x 25 screws -1- and one M6 x 80 screw -2- on the inside of the cylinder head and tighten according to specifications.

Tightening torque: 13 Nm (9.5 ftlb.)






Overview of screws for cylinder head 1-3






Overview of screws for cylinder head 4-6

Screw in external Torx screws (E10, M6 x 25) on the outside of the cylinder head and tighten according to specifications.

Tightening torque: 13 Nm (9.5 ftlb.)

WM 150520 Removing and installing camshafts (includes setting timing) - Turbo

Camshaft Bearing Cap






Intake Manifold Specifications

Exhaust Manifold Specifications

Camshaft Gear/Sprocket Specifications