706719 Removing and installing B-pillar trim

WM 706719 Removing and installing B-pillar trim

Technical values





Removing B-pillar trim

Removing B-pillar trim panel





Installation location of B-pillar trim panel

1. Lift up coat hook bracket -1- from below with a plastic spatula -arrow- and carefully pull up and off.





Unclipping coat hook bracket

2. Press seat belt height adjuster actuator -1- out of the fastening screw using a screwdriver.





Pressing out seat belt height adjuster actuator

3. Unscrew fastening screw -1- from sash guide mount -2-.





Removing B-pillar trim panel

4. Unscrew fastening screw -3-. Lift B-pillar trim -4- up and out.

Installing B-pillar trim

Installing B-pillar trim panel





Installation location of B-pillar trim panel

1. Push grommet -5- onto lug of the B-pillar trim panel -4- and insert in bottom of the B-pillar.





Installing B-pillar trim panel

2. Screw down B-pillar trim panel -4- with fastening screw -3-.
3. Position sash-guide mount -2- on the B-pillar and tighten with fastening screw -1-. Tightening torque => Tightening torque: 37 ftlb.
4. Press peg of the seat beat height adjuster actuator -1- into the bore of the fastening screw.





Installing seat belt height adjuster actuator

5. Check sheetmetal clips -2- , replacing if necessary.





Installing coat hook bracket

6. Carefully press coat hook bracket -1- into the sheetmetal clips -2- at the bottom of the B-pillar trim panel.