706819 Removing and installing C-pillar trim

WM 706819 Removing and installing C-pillar trim

Technical values





Preliminary work

1. Remove rear side trim panel. => 707519 Removing and installing rear side trim panel - section on "Removing"
2. Remove rear roof trim panel. => 708519 Removing and installing rear roof trim panel - section on "Removing"

Loosening seat belt and fitting

1. Lever off cap -1- with a screwdriver -arrow-.





Removing seat belt and fitting

2. Unscrew fastening screw -2-. Remove washer -3- , seat belt mount -4- and spacer sleeve -5-.

Removing C-pillar trim

Removing C-pillar trim panel





Installation position for C-pillar trim panel

1. Pull C-pillar trim panel -1- inwards.





Removing C-pillar trim panel

2. Thread seat belt with mounting component -2- through the C-pillar trim panel -Arrow A-.
3. Remove C-pillar trim panel -1-.

Installing C-pillar trim

Installing C-pillar trim panel





Installation position for C-pillar trim panel

1. Check sheetmetal clips -3- , replacing if necessary.





Installing C-pillar trim

2. Thread seat belt with mounting component -2- through the C-pillar trim panel -1- -Arrow A-.
3. Position C-pillar trim panel -1- on the C-pillar and clip in.

Subsequent work

Securing seat belt and fitting

Information

Ensure that belt strap can run properly!

1. Secure fastening screw -2- , washer -3- , seat belt with fitting -4- and spacer sleeve -5- on the body. => Tightening torque: 50 Nm (37 ftlb.)+/-10 %





Securing seat belt and fitting

2. Press cap -1- onto the fastening screw -2- ( -arrow- ).

Subsequent work

1. Install rear roof trim panel. => 708519 Removing and installing rear roof trim panel - section on "Installing"
2. Install rear side trim panel. => 707519 Removing and installing rear side trim panel - section on "Installing"